Q: How do speaker cables affect the sound?

Influence on Sound Quality Speaker cables primarily affect audio by influencing resistance, capacitance, and inductance, which can alter dynamics, frequency response, and clarity—especially noticeable in high-end systems over longer runs. • Resistance: Thinner cables increase damping factor loss, softening bass control and transient speed. • Capacitance/Inductance: Poor construction smears highs, reduces imaging, or adds haze; well-designed cables preserve detail and soundstage. • Shielding/Noise: Unshielded cables pick up EMI/RFI, raising the noise floor and veiling mids. • In revealing HiFi setups, quality cables unlock potential by minimizing losses, though differences are subtle below ~€10/m in average systems.

Q: What cross-section should the speaker cable have for high-end speakers?

For high-end speakers, experts recommend a cross-section of at least 2.5 mm² to 4 mm² (equivalent to 12–14 AWG), depending on cable length, power, and impedance. Recommended Cross Sections • Up to 5 m: 1.5–2.5 mm² – sufficient for most high-end setups with good bass control and minimal resistance. • 5–10 m: 2.5–4 mm² – ideal for longer runs to keep damping and power loss under 1%. • Over 10 m: 4–6 mm² or more – essential for powerful amps (>100 W) or low impedance (4 Ohm). Why This Matters for High-End A sufficient cross-section minimizes resistance, preserves transients, and ensures tight bass and precise highs – thin cables (under 1.5 mm²) cause "slack" sound, overly thick ones increase capacitance unnecessarily. Opt for OFC copper or silver-plated for best results in demanding systems.

Question 1

Welche Vorteile bieten hochwertige Lautsprecherkabel?

Accepted Answer

Hochwertige Lautsprecherkabel verbessern die Signalübertragung vom Verstärker zu den Lautsprechern, indem sie Widerstand, Kapazität und Störungen minimieren. Dies führt zu einem klareren Klang, besserer Detailauflösung und verbesserter Dynamik. Wichtigste Vorteile
 • Geringerer Signalverlust : Dickere, reinere Leiter (z. B. sauerstofffreies Kupfer) erhalten die Klangtreue auch über längere Strecken aufrecht und bewahren die Basskontrolle und die Brillanz der hohen Frequenzen.
 • Niedrigeres Grundrauschen : Überlegene Abschirmung und Isolierung verhindern elektromagnetische Störungen (EMI/RFI), was zu einem schwärzeren Hintergrund und transparenteren Mitten führt.
 • Bessere Impedanzanpassung : Das optimierte Kabeldesign gewährleistet eine stabile Leistung auch bei anspruchsvollen Lautsprechern und verbessert Timing, Klangabbildung und die gesamte Musikalität.

Diese Vorteile kommen besonders bei High-End-HiFi-Anlagen mit detailreichen Komponenten zum Tragen, wo subtile Unterschiede hörbar werden – für Budget-Systeme reicht jedoch ein einfaches 12-14 AWG-Kabel aus.

Question 2

Welches Lautsprecherkabel soll ich kaufen?

Accepted Answer

Wählen Sie Lautsprecherkabel entsprechend der Leistung Ihres Systems, der Kabellänge und Ihrem Budget – für die meisten HiFi-Anlagen empfiehlt sich ein Querschnitt von 12–14 AWG aus reinem Kupfer (vorzugsweise OFC) mit guter Abschirmung. Wichtige Auswahlkriterien

• Querschnitt (AWG) : 14 AWG für kurze Strecken (<10 m, geringe Leistung); 12 AWG oder dicker für längere Strecken oder hohe Stromstärken, um Widerstand und Leistungsverlust zu minimieren.
 • Material : Sauerstofffreies Kupfer (OFC) für geringe Signalverluste; versilbert für verbesserte Höhen in High-End-Systemen.
 • Konstruktion : Verdrillte oder geflochtene Adernpaare reduzieren Störungen; niedrige Kapazität für bessere Höhen und Dynamik.
Achten Sie darauf, dass das Kabel zur Impedanz Ihrer Lautsprecher und zur Ausgangsleistung Ihres Verstärkers passt – testen Sie es am besten in Ihrem System, da subjektive Unterschiede variieren können.

Question 3

How do speaker cables affect the sound?

Accepted Answer

Influence on Sound Quality

Speaker cables primarily affect audio by influencing resistance, capacitance, and inductance, which can alter dynamics, frequency response, and clarity—especially noticeable in high-end systems over longer runs.

• Resistance: Thinner cables increase damping factor loss, softening bass control and transient speed.​
 • Capacitance/Inductance: Poor construction smears highs, reduces imaging, or adds haze; well-designed cables preserve detail and soundstage.​
 • Shielding/Noise: Unshielded cables pick up EMI/RFI, raising the noise floor and veiling mids.​
 • 
In revealing HiFi setups, quality cables unlock potential by minimizing losses, though differences are subtle below ~€10/m in average systems.

Question 4

What cross-section should the speaker cable have for high-end speakers?

Accepted Answer

For high-end speakers, experts recommend a cross-section of at least 2.5 mm² to 4 mm² (equivalent to 12–14 AWG), depending on cable length, power, and impedance.​

Recommended Cross Sections
 • Up to 5 m: 1.5–2.5 mm² – sufficient for most high-end setups with good bass control and minimal resistance.​
 • 5–10 m: 2.5–4 mm² – ideal for longer runs to keep damping and power loss under 1%.​
 • Over 10 m: 4–6 mm² or more – essential for powerful amps (>100 W) or low impedance (4 Ohm).​

Why This Matters for High-End

A sufficient cross-section minimizes resistance, preserves transients, and ensures tight bass and precise highs – thin cables (under 1.5 mm²) cause "slack" sound, overly thick ones increase capacitance unnecessarily. Opt for OFC copper or silver-plated for best results in demanding systems.

Question 5

Which speaker cable should I choose for the best sound?

Accepted Answer

High-quality copper and silver minimize resistance, ensuring lossless signal transmission from amplifier to speakers.​

• Reduced signal loss: Thicker, purer conductors like oxygen-free copper (OFC) or silver-plated copper maintain audio fidelity over longer runs, preserving bass control and high-frequency sparkle.​
 • Lower noise floor: Superior shielding and insulation block EMI/RFI, resulting in blacker backgrounds and more transparent mids.​
 • Better impedance matching: High-quality copper and silver minimize resistance and therefore assure a lossless signal transmission, improving timing, imaging, and overall musicality.​

These advantages are most noticeable in high-end HiFi systems with revealing components.

Question 6

How important is a good speaker cable for sound?

Accepted Answer

A high-quality speaker cable plays a decisive role in preserving the signal integrity between amplifier and speakers. Poor-quality or undersized cables can cause signal loss, distortion, or tonal imbalance. In high-end systems, cables are not passive accessories but essential components that enable the system to perform as a coherent whole.

Question 7

Beeinflusst der Querschnitt des Lautsprecherkabels die Klangqualität?

Accepted Answer

Ja. Der Querschnitt bestimmt den elektrischen Widerstand. Ist das Kabel zu dünn, steigt der Widerstand und es gehen Dynamik und Präzision verloren – besonders bei längeren Strecken. Für typische Hifi-Anwendungen sind 2,5 mm² bis 4 mm² empfehlenswert, bei hohen Leistungen oder langen Kabelwegen 6 mm² oder mehr.

Question 8

Which speaker cables are the best?

Accepted Answer

The “best” cable matches your amplifier, speaker impedance, and the sonic character you want. Oxygen-free copper (OFC) cables are standard for their balance of conductivity and durability. Multi-strand, well-shielded designs minimize interference. In the high-end range, some prefer hybrid or silver-plated conductors for enhanced detail and openness.

Question 9

Warum sind Lautsprecherkabel aus Kupfer und nicht aus Silber?

Accepted Answer

Kupfer bietet die beste Balance aus Leitfähigkeit, Stabilität und Preis. Silber leitet zwar etwa 6 % besser, oxidiert aber schneller und ist deutlich teurer. Daher gilt hochwertiges Kupfer oder versilbertes Kupfer als optimaler Kompromiss zwischen Klang und Haltbarkeit.

Question 10

What’s the best material for speaker cables?

Accepted Answer

The most common materials are:

• OFC (Oxygen-Free Copper): Excellent clarity and low resistance.
 • OCC (Ohno Continuous Cast Copper): Ultra-pure and highly conductive for refined signal transfer.
 • Silver or Silver-plated copper: Higher conductivity and enhanced high-frequency response.
For most high-end systems, OCC or silver-plated OFC cables deliver outstanding results.

Question 11

Do expensive speaker cables make a difference?

Accepted Answer

Yes—provided the rest of the system has matching resolution. In a refined hifi setup, better conductors, dielectric materials, and construction (twist geometry, shielding, termination quality) can significantly affect soundstage, spatial precision, and tonal naturalness. However, with budget systems, the differences become less noticeable.

Question 12

Which cable delivers the best sound?

Accepted Answer

The best cable is the one that harmonizes electrically and acoustically with your system. Neutral-sounding copper cables fit most configurations; silver-plated versions might bring more detail, while OCC copper tends to sound more organic and smooth. Always evaluate by ear in your specific setup.

Question 13

Why use copper cables?

Accepted Answer

Copper combines high conductivity with durability and flexibility. It resists fatigue from bending and provides consistent performance over many years. Technically and economically, copper remains the optimal conductor for audio applications.

Question 14

Why does silver conduct better than copper?

Accepted Answer

Silver’s atomic structure provides slightly better electron mobility than copper—around 6 % better conductivity according to IEC standards. However, this small advantage is usually offset by its higher cost and tendency to tarnish, which can affect surface contact in long-term use.

Lehmann Audio - Black Cube SE II Sven Väth Edition - Hifi Phono Vorstufe

Lehmann Audio Black Cube SE II Sven Väth Manual

Frequently asked questions