What is the Lehmannaudio 3S Floatweight 400?
The Lehmannaudio 3S Floatweight 400 is a record weight with an internal vibration-damping structure. It rests on the record’s centre-label area and is designed to reduce unwanted mechanical resonances during vinyl playback rather than relying on mass alone.
What makes the 3S Floatweight 400 different from a conventional record weight?
Its internal construction combines two cascaded 3S fabric discs with additional damping and structural layers. The manufacturer specifies seven material layers in total. This construction is designed to dissipate vibration rather than simply increase the load on the record.
How is the centring sleeve used?
Use the supplied sleeve to centre the Floatweight over the turntable spindle. Once the weight rests correctly on the record, carefully remove the sleeve without moving the weight. The Floatweight should remain centred without touching the spindle. Follow the supplied instructions when positioning and removing it.
Which spindle sizes does the centring sleeve accommodate?
The sleeve has an internal diameter of 7.2 mm at one end and 7.3 mm at the other. Use the end appropriate to your spindle without forcing it into place. Check the actual fit rather than assuming compatibility with every turntable.
How much does the Floatweight 400 weigh, and how large is it?
The record weight is approximately 385 g, and the removable centring sleeve weighs approximately 15 g. Published dimensions are approximately 80 mm in diameter and 38 mm in height. The sleeve is removed after positioning, leaving approximately 385 g on the record during use.
Is the Floatweight 400 compatible with every turntable?
Compatibility should be checked for the specific turntable. Confirm the spindle fit, available clearance and the manufacturer’s guidance on additional record weights. On suspended turntables, check whether the extra load requires suspension adjustment. Compatibility should not be assumed from the turntable brand alone.
Does avoiding spindle contact eliminate the additional load on the turntable?
No. Removing direct contact with the spindle changes the mechanical coupling, but the weight still rests on the record and platter. The turntable must therefore be suitable for the additional load. Spindle isolation should not be described as eliminating all bearing load or guaranteeing damage-free use.
What audible changes can I expect?
Lehmannaudio describes potential improvements in detail, spatial presentation and perceived clarity, and reviewers have reported similar listening impressions. These are not guaranteed results for every system or record. The audible effect depends on the turntable, record, setup and listening conditions.
Does the Floatweight 400 flatten warped records?
It should not be treated as a record-flattening device. Its main purpose is resonance damping, and it does not provide a screw-down clamp or outer-ring mechanism. Do not assume it will correct every warp or make an unsuitable record safe to play.
What is included with the Lehmannaudio 3S Floatweight 400?
The documented package includes the Floatweight, the removable centring sleeve and a wooden storage box. Brushes, cleaning fluids and other record-care accessories should not be assumed to be included unless explicitly stated in the shop offer.
Bewertungen
Wesentlich beruhigterer Klang, viel runder und angenehmer.Details kommen auch mehr zum Vorschein!Meine Empfehlung - das Floatweight 400 bleibt definitiv!