Synergistic Research MiG SRX Speaker Footers
The Synergistic Research MiG SRX Speaker Footers are threaded loudspeaker feet with adjustable stainless steel spikes. They are designed for the mechanical interface between a loudspeaker and the floor, combining a multi-material chassis with the manufacturer’s proprietary UEF Metamaterials.
Unlike the MiG SRX footers intended for audio components, the Speaker Footers attach to compatible loudspeaker mounting points using thread adapters selected when ordering.
For a conventional four-point installation, Synergistic Research specifies four footers per speaker. A stereo pair therefore requires eight.
A multi-material approach to speaker support
The CNC-machined chassis combines aluminium, stainless steel, carbon fibre and a material described by Synergistic Research as carbon tungsten.
The manufacturer presents this combination as a resonance-management system rather than a conventional spike alone. Its stated aim is to influence the transfer of mechanical energy at the speaker-to-floor interface.
Descriptions of improved imaging, bass definition and tonal presentation are the manufacturer’s intended listening outcomes. They should not be understood as guaranteed results in every loudspeaker and room combination.
Adjustable stainless steel spikes
Each footer uses an adjustable stainless steel spike to help level the loudspeaker during installation.
Synergistic Research describes use on carpet, hardwood and stone. The floor finish still requires individual consideration: do not assume that a pointed spike can contact a vulnerable surface without marking it.
Confirm any necessary floor protection and the suitability of the installation before placing the speaker’s weight on the footers. Floor-protection accessories should not be assumed to be included unless confirmed in the supplied package.
Four footers with two different roles
The standard four-footer arrangement is not made up of four interchangeable tuning positions.
Three footers use a hybrid UEF Metamaterial formulation. The fourth uses a different formulation, which Synergistic Research describes as being specifically voiced for centre-image focus.
The manufacturer specifies this fourth footer at the rear inside corner of each speaker:
Left speaker: rear-right mounting point.
Right speaker: rear-left mounting point.
These positions are viewed from the listening position, facing the speakers. Both special footers therefore occupy the rear corners nearest the centre of the stereo system.
Follow the supplied identification and installation instructions rather than treating every footer as interchangeable.
Thread adapters selected for your speakers
The MiG SRX Speaker Footers are supplied with a choice of thread adapter.
The published options include ½″-13, ¼″-20, M8 × 1.25 and M6 × 1.
Custom thread options are available on request.
The thread diameter alone is not enough to establish compatibility. Pitch, usable engagement depth, clearance and the speaker’s mounting arrangement also need to be checked.
The manufacturer additionally lists a YG-specific adapter, but its published pitch information is inconsistent. Confirm the exact specification before ordering this option.
Three-point speaker mounting
Speakers with three mounting points can also be accommodated. Synergistic Research advises ordering individual footers rather than a standard set of four.
A three-point installation requires the appropriate combination and placement of footers. Confirm the configuration for your speaker model before ordering; do not simply omit one unit from the four-point layout.
Speaker Footers, not component footers
The MiG SRX name also appears on Synergistic Research footers intended for placement beneath audio components.
Those products have a different configuration and installation concept. Their dimensions, tuning arrangements and placement options should not be transferred to the MiG SRX Speaker Footers.
For this product, the relevant starting points are the loudspeaker’s mounting threads, the number of support points and the correct positioning of the differently tuned footer.
Plan the installation before ordering
Specify your speaker make and model, mounting thread and required quantity when ordering.
For a conventional stereo pair with four mounting points per speaker, eight footers are required. A set of four equips one speaker only.
Published information does not provide a numerical load rating, complete dimensions or a spike-adjustment range. Confirm these details where they are relevant to the safety and fit of your installation, particularly with heavy speakers or restricted plinth clearance.
Specification | Synergistic Research MiG SRX Speaker Footers |
Product category | Threaded loudspeaker feet |
Intended application | Speaker-to-floor mechanical interface |
Chassis | CNC-machined, multi-material construction |
Listed materials | Aluminium, stainless steel, carbon fibre, carbon tungsten |
Proprietary material technology | UEF Metamaterials |
Floor contact | Adjustable stainless steel spike |
Standard four-point installation | Four footers per loudspeaker |
Quantity for a conventional stereo pair | Eight footers |
Four-footer arrangement | Three hybrid-formulation footers and one differently tuned footer |
Position of the differently tuned footer | Rear inside corner of each speaker |
Published thread options | ½″-13, ¼″-20, M8 × 1.25, M6 × 1 |
Additional adapter options | Custom threads on request; YG specification requires confirmation |
Three-point mounting | Available through an individually specified footer configuration |
Manufacturer purchase formats | Individual footer or set of four |
Dimensions and weight | Not specified on the checked manufacturer page |
Numerical load capacity | Not specified on the checked manufacturer page |
Floor-protection accessories | Package contents to be confirmed |
What are the Synergistic Research MiG SRX Speaker Footers?
They are threaded loudspeaker feet with adjustable stainless steel spikes, a multi-material chassis and proprietary UEF Metamaterials. Synergistic Research designs them for the mechanical interface between a loudspeaker and the floor.
How many MiG SRX Speaker Footers do I need?
The standard configuration uses four footers per speaker, so a conventional stereo pair requires eight. A set of four equips one speaker only. Confirm whether the selected shop option is an individual footer, a set of four or a complete eight-footer package.
Are all four footers in a standard installation identical?
No. Three use a hybrid UEF Metamaterial formulation, while the fourth has a different formulation. Synergistic Research describes the fourth as being specifically voiced for centre-image focus and assigns it a particular mounting position.
Where does the differently tuned fourth footer go?
It goes at the rear inside corner of each speaker: rear right on the left speaker and rear left on the right speaker, viewed from the listening position. Follow the supplied identification and installation instructions.
Which mounting threads are available?
The manufacturer lists ½″-13, ¼″-20, M8 × 1.25 and M6 × 1 adapters, with custom options available on request. Confirm thread pitch, engagement depth and clearance for your speaker. The published YG adapter specification is inconsistent and requires confirmation before ordering.
Can the footers be used with speakers that have three mounting points?
Yes. Synergistic Research advises ordering individual footers for three-point speaker mounting. The correct footer combination and placement should be confirmed for the installation rather than assumed from the standard four-point arrangement.
Can I use the spikes on hardwood or stone floors?
The manufacturer describes use on carpet, hardwood and stone, but this does not guarantee that a pointed spike will leave a floor unmarked. Confirm suitable floor protection and do not assume protective accessories are included.
Are these the same as MiG SRX component footers?
No. MiG SRX Speaker Footers are a separate product designed to attach to loudspeaker mounting points. Specifications and placement instructions for MiG SRX component footers should not be transferred to the speaker version.
What is the maximum supported speaker weight?
The checked manufacturer page does not publish a numerical load rating. Confirm the supported load and mechanical compatibility before ordering, especially for heavy loudspeakers.
Do the footers guarantee better imaging or bass?
No specific listening result can be guaranteed from the published information. Synergistic Research describes imaging, bass and tonal benefits as intended outcomes, but the product page does not provide quantified comparative measurements establishing those results for every system.